Itrademarket Priority
Write a review
Average User Review
There is no review for this company
ASPHALT EQUIPMENT (LAB. ASPAL/JALAN)) BI-100A Specific Gravity of Semi-Solid Bituminous Materials BI-110A Distilation of Cutback Asphalts BI-120 Water Content in Petroleum Products BI-150A Saybolt Viscosimeter BI-200 Flash and Fire Point by Cleveland Open Cup BI-200A Flash and Fire Point by Cleveland Open Cup BI-210A Softening Point Test Set BI-220A Loss On Heating / Thin-Film Test BI-230 Laboratory Penetration Test Set BI-230A Laboratory Penetration Test Set BI-250 Ductility of Bituminous Materials Test Set BI-300 Contrifuge Extractor Test Set BI-300A Centrifuge Extractor Test Set BI-310 Reflux Extractor Test Set BI-320 Marshall Test Set BI-400A Core Drilling Test Set BI-450 Benkleman Beam BI-470 Mot Straight Edge  English  Indonesia |
|
| BI-100 SPECIFIC GRAVITY OF SEMI—SOLID BITUMINOUS MATERIALS, ASTM D-70 AASHTO T-228 | ||
|
BI-100 SPECIFIC GRAVITY OF SEMI—SOLID BITUMINOUS MATERIALS
ASTM D-70 AASHTO T-228 For determining the specific gravity of semi-solid bituminous materials, asphalt cement, and soft tar pitches by use of a picnometer BI-101 Picnometer Hubbart type, 24 ml capacity 1 Pc BI-102 Picnometer Hubbart type, 25 ml capacity 1 Pc GE-642 Thermometer ASTM 63 C, 8-32oC 1 Pc Also required, but....
| ||
| BI-110A Distilation Of Cutback Asphalts, ASTM D-402 AASHTO T-78 | ||
|
BI-110A Distilation Of Cutback Asphalts
ASTM D-402 AASHTO T-78 For measuring the amount of the more volatile constituents in cut back asphaltic product BI-111 Flask Heat resistance glass 500 ml capacity, with side arm 1 Set BI-112 Condenser Glass, jacketed 1 Set BI-113 Adapter Heat resistance glass 1 Set BI-114 Shield Metal, asbestos lined, glass window 1 Set BI-115 Shield and Flask....
| ||
| BI-120 Water Content In Petroleum Products, ASTM D-95 AASHTO T-55 | ||
|
BI-120 Water Content In Petroleum Products
ASTM D-95 AASHTO T-55 For determining water in crude petroleum, tars and products derived from these materials BI-121 Flask Heat resistance glass, 500 ml capacity 1 Pc BI-122 Water Trap Glass for receiving distilated water 1 Pc BI-123 Condenser Glass, jacketed 1 Pc BI-124 Support Assembly For holding apparatus assembly 1 Set BI-125 Flask....
| ||
| BI-150A Saybolt Viscosimeter, ASTM D-88 AASHTO T-72 | ||
|
BI-150A Saybolt Viscosimeter
ASTM D-88 AASHTO T-72 For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C. BI-151 Viscosimeter Stainless steel bath, motor stirer, 220 V-AC, Thermostat control panel, 2 tubes capacity 1 Set BI-154 Viscosimeter Tube Brass, seamless, provided with tips and tip wrench 2 Pcs BI-155 Tube Wrench T-wrench 1 Pc....
| ||
| BI-220A, Flash and Fire Point, ASTM D-92 AASHTO T-48 | ||
|
BI-200A Flash and Fire Point
by Clevelend Open Cup ASTM D-92 AASHTO T-48 For determining flash and fire point by cleveland open cup for petroleum product and other liquids, expect fuel oils and materials having an open flash point below 79 C (173 F) as determined by cleveland open cup tester BI-201 Flash Cup Brass, insulation handle 1 Pc BI-202A Cleveland Electric Electric, 220 V-AC,....
| ||
| BI-210A Softening Point Test Set, ASTM D-36 AASHTO T-53 | ||
|
BI-210A Softening Point Test Set
ASTM D-36 AASHTO T-53 For determining softening point of asphalt and tar using the ring and ball method BI-211 Shouldered Ring Assembly Machined brass, height adjusment 1 Set BI-212 Standard Ball Steel ball, 9.52 mm dia. 2 Pcs BI-213 Flash Support Mesh wire gauze variable height adjustment 1 Set BI-214 Support Assembly Metal, provided with thermometer....
| ||
| BI-220A, Loss on Heating/Thin-Film Test | ||
|
BI-220A Loss on Heating/Thin-Film Test
ASTM D-6/D-1754 AASHTO T-47/T-179 For determining the loss in mass (exclusive of water) of asphaltic compounds after heating BI-221 Resolving Shelf Oven Variable temperature oven, cas alumunium rotating shelf, 5-6 RPM, external electromotor drive, 220 V-AC, 1400 Watt. 1 Set GE-390 Thin Box 55 mm i.d. approx. alumunium sheet, seamless 12 Pcs GE-643....
| ||
| BI-230A LABORATORY PENETRATION TEST SET, ASTM D-5, AASHTO T-49 | ||
|
8BI-230A LABORATORY PENETRATION TEST SET
ASTM D-5, AASHTO T-49 For determining consistency of bituminous materials BI-231A Penetrometer Electric control box, 220 V-AC variable timer, ON-OFF and START switch for automatic plunger release cast alumunium frame, 4 1/2" dial indicator, 400 x 0.1 mm dial, knob control : manual + electric weight of needle and plunger : 50 gr. 1 Set BI-232....
| ||
| BI-250, Ductility of Bituminous Materials Test set | ||
|
BI-250 Ductility of Bituminous Materials
Test Set ASTM D-113 AASHTO T-51 For determining ductility of formed asphalt/cement or semi solid bitument by measuring distance of elongation before breaking point when two end of briquet are pulled a part at a apecific speed and temperature/ BI-251 Ductility Mold Form sample shape and hold end during test, made of brass, provided with base 1....
| ||
| BI-300A, Centrifuge Extractor Test Set | ||
|
BI-300A, Centrifuge Extractor Test Set ASTM D-2172 AASHTO T-164
For determining bitument content in hot mixed paving mixture and pavement sample Dimension (l x w x h) : 60 x 40 x 60 cm Gross Weight : 50 kg BI-305 Centrifuge Extractor Electric, 220 V-AC, variable speed DC motor up to 3600 rpm, alumunium housing, removable cover and bowl, 1500 gram capacity. 1 Set BI-303 Filter Paper....
| ||
| BI-310, Reflux Extractor Test Set. | ||
|
BI-310, Reflux Extractor Test Set
ASTM D-2172 AASHTO T-164 For determining bitument content in hot mixed paving mixture and pavement sample BI-311 Reflux Extractor Consist of : BI-311.1 Glass Jar Pyrex 6" i.d approx. 1 Pc BI-311.2 Funnel Two wire mesh screen cone 1 Pc BI-311.3 Condensor Brass/copper 1 Pc BI-312 Hot Plate 220 V-AC, 1000/1500 Watt 1 Set BI-313 Filter Paper Low ash....
| ||
| BI-320, Marshall Test Set, ASTM D-1559 AASHTO T-245. | ||
|
BI-320, Marshall Test Set
ASTM D-1559 AASHTO T-245 For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface by means of the marshall apparatus. BI-321 Compression Machine Steel frame, electric, 220 V-AC, 1/2 HP, 1 Phase, speed:2" per minute 1 Set BI-322 Compaction Mold Machined steel, galvanized, 4" dia., 3" height,....
| ||
| BI-400, Core Drilling Test Set | ||
|
BI-400, Core Drilling Test Set
For cutting core samples from asphalt, concrete and other material on the road, run ways and structures. BI-401 Core Drilling Machine Cast alumunium frame, gasoline engine 5,5 HP (BNS - USA), 4 cycle vertical drilling position: rubber caster, up to 4" dia. bit 1 Set BI-406 Diamond Bit 4" inner dia. 1 Pc (HOFFMAN, made in USA) BI-407 Sample Tong 4" dia. 1....
| ||
| BI-450, Benkleman Beam | ||
|
BI-450 Benkleman Beam
For measuring the deflection of flexible pavement under the action of moving wheel loads. BI-451 Fixed Beam Alumunium profile frame, 3 points adjuster, with vibrator and dial holder. Alumunium strip arm, 1: 2 lever ratio 1 Set BI-455 Tire Gauge 120 psi capacity 1 Pc BI-456 Surface Thermometer Range 30 x 0.01 mm 1 Pc
| ||
| BI-460 Percentage Refusal Density / PRD, BS 598-104, EN 12697-32, 13280-4 | ||
|
BI-460 Percentage Refusal Density / PRD,
Percentage Refusal Density / PRD, is defined as ratio of the initial dried density of the sample to the final density (refusal density) expressed a percentage. The sample bulk density is determined by weighing in air and water. It is then heated in a split mould and compacted to refusal using a vibrating hammer. The final density is obtained by....
| ||
| BI-470 MOT STRAIGHT EDGE | ||
|
BI-470 MOT STRAIGHT EDGE
For measuring the irregulation of road surface both asphalt and concrete pavement BI-471 Mot Straight Alumunium profile, 3 meter length, with handle 1 Pc BI-472 Metric Wedges Variable measurement from 2.5 - 7.5 cm, machine cast alumunium 1 Pc Dimension (l x w x h) : 244 x 50 x 50 cm Gross Weight : 45 kg
| ||
| Oven (Memmert), Hot Plate, Water Bath | ||
|
GE-174 / GE-191 / GE-200
Oven (Memmert) Universal oven, double walled metal shield. temperature range from room temperature t0 200oC GE-171 Drying Oven 14 ltr capacity, internal dimension (l x w x h) 320 x 240 x 175 mm GE-172 Drying Oven 32 ltr capacity, internal dimension (l x w x h) 400 x 320 x 250 mm GE-173 Drying Oven 39 ltr capacity, internal dimension (l x w x h) 480 x 320 x 250....
| ||
| Products Catalog: TRADING LAB. EQUIPMENT | |
|
Manufacturer of Material Testing Equipment, for:
• Soil Equipment, Penetrometer, CBR, Hydrometer, Compaction, Consolidation, etc • Agregate Equipment, Aieve, Abrasion, Impact, Specific Gravity, etc • Cement Equipment, Time of Setting, Compression Strength, etc • Concrete Equipment, Cube/Cylinder Mold, Compression Machine, Slump, Mixer, etc • Asphalt Equipment, Saybolt Viscosimeter.... | |
| Proving Ring, GE-101.6 / GE-137 / GE-140 (2.000 Lbs, 6.000 Lbs, 10.000 Lbs) include kalibrasi KAN | ||
|
GE-101.6 / GE-137 / GE-140
Proving Ring Precision measuring device, high grade steel with plated finishing 3/4" tapped hole at both end. Supplied complete with dial and calibration chart. GE-101.1 Proving Ring 100 kg capacity GE-101.2 Proving Ring 250 lbs capacity GE-101.3 Proving Ring 500 lbs capacity GE-101.4 Proving Ring 1.000 lbs capacity GE-101.5 Proving Ring 2.000 lbs capacity....
| ||
| BALANCE / TIMBANGAN, | ||
|
GE-150 / GE-152 / GE-157 / GE-159 / GE-161
Cent O-Gram Balance GE-150 Cent O-Gram Balance 311 gr capacity 0.01 sensitivity GE-151 Cent O-Gram Balance 311 gr capacity 0.01 sensitivity with dial type adjustment Triple Beam Balance GE-152 Triple Beam Balance 2.610 gr capacity 0.1 sensitivity. Supplied complete with weights. GE-153 Dial O-Gram Balance 2.610 gr capacity 0.1 sensitivity....
| ||
